EMT Practice Test

1. Question Content...

---

Question1: Which two tools can be used to create custom ESXi ISO images when preparing for the VMware Cloud Foundation bring-up process? (Choose two.)

Question2: A customer would like to use VCF in two new regional data centers, and they have a hard requirement to stretch layer 2 networks across the two sites. Both sites have a 130ms latency.
What would be the ideal solution?

Question3: A systems administrator is tasked with creating a new VI workload domain that will leverage either an external NFS or a VMFS on FC storage as the principal storage.
Which action is required to fulfill this requirement?

Question4: Which product SSL certificate replacement can be automated using the SDDC Manager?

Question5: Which two use cases would require the creation of multiple clusters in a workload domain?
(Choose two.)

Question6: VCF design workshops have been conducted, and the architect collected the following customer requirements for the newly planned VCF infrastructure:
- The new VCF infrastructure is targeting two zones: DEV/UAT and DMZ.
- The infrastructure team requested that the number of management components be minimized as much as possible.
- Eight hosts should be ordered for the DEV/UAT environment.
- Four hosts should be ordered for the DMZ environment.
- The DEV/UAT workloads must comply with an erasure coding vSAN storage policy and have the ability to tolerate the failure of two hosts.
Which workload domain sizing will be required to achieve these requirements?

Question7: Which two features are supported when implementing NSX Federation? (Choose two.)

Question8: Which vSphere Lifecycle Manager (LCM) function is supported in VMware Cloud Foundation (VCF)?

Question9: Which service is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host?

Question10: Which tool can be used to add a new vSphere Cluster to an existing VI Workload Domain?

Question11: Which license is required to enable Workload Management on VMware Cloud Foundation?

Question12: An administrator successfully finished restoring a SDDC Manager and now needs to verify its operation.
Which tool should the administrator use for this verification?

Question13: Which two NSX-T Data Center components are configured when deploying an NSX Edge cluster using SDDC Manager? (Choose two.)

Question14: An architect is designing overlay networking and routing for two VMware Cloud Foundation VI workload domains.
The following requirements must be met in the design:
- NSX-T Bare Metal Edge nodes are required to satisfy a requirement for extremely low latency.
- The costs must be kept to a minimum.
Which design meets these customer requirements?

Question15: An administrator must configure the user authentication for a new VMware Cloud Foundation (VCF) deployment.
Where would the identity provider be configured to reach this goal?

Question16: Which two roles are played by a Spherelet in a Tanzu-enabled VCF workload domain? (Choose two.)

Question17: A systems administrator is tasked with deploying a new VI Workload Domain cluster to support the HR system. A new storage policy must be created to satisfy the following requirements:
- Support two host failures
- Use the least amount of hosts
- Minimize storage capacity usage
Which configuration will satisfy these requirements?

Question18: An administrator is tasked with creating a new VMware Cloud Foundation VI Workload Domain.
Which statement is correct when commissioning new ESXi hosts to the SDDC Manager inventory?

Question19: An administrator wants to scale an existing VMware Cloud Foundation (VCF) environment by adding a new VI Workload Domain.
Which two storage options can be used for the new VI Workload Domain? (Choose two.)

Question20: Which functionality does a NSX Tier-1 Gateway provide to a vSphere with Tanzu deployment?

Question21: Which type of storage entity is used as the backing disks for persistent volumes in vSphere with Tanzu?

Question22: Which option is supported to upgrade the ESXi 7.x hosts for a vSAN stretched cluster in a VMware Cloud Foundation environment?

Question23: An administrator needs to upgrade the current VMware Cloud Foundation (VCF) environment from version 4.1 to 4.3, knowing that the environment has direct access to the internet.
Which steps should be performed to download the online bundles?

Question24: A systems administrator is tasked to deploy a management domain as part of the VMware Cloud Foundation Bring-Up process and notes the VCF components which will require at least four vCPUs.
Which VCF components have this requirement as default?

Question25: The vSAN Witness appliance for a VMware Cloud Foundation stretched vSAN cluster stopped working. The administrator needs to roll out a new appliance to replace the old one.
Which tool should the administrator use to perform this task?

Question26: Which two configurations are part of the VMware Cloud Builder validation process? (Choose two.)

Question27: An architect needs to create a VMware Cloud Foundation (VCF) VI Workload Domain design with these requirements:
Design blueprint needs to be repeatable for additional regions
- Multiple availability zones
- Seven nodes per availability zone to host the workloads
- vSAN storage will be used
What is the maximum accepted latency supported by vSAN between the two availability zones?

Question28: An administrator is tasked with deploying a VMware Cloud Foundation environment that consists of three VI Workload Domains. Each VI Workload Domain is comprised of two clusters, with 18 hosts in each cluster.
Which option fulfills this requirement while minimizing the number of NSX-T Manager instances?

Question29: An architect is designing networking for a developer-ready infrastructure on VMware Cloud Foundation. During the discussion with the network team, a question comes up about the use of a routable CIDR range.
Which item uses this type of range?

Question30: Which two functionalities does a NSX Tier-0 Gateway provide to a vSphere with Tanzu deployment? (Choose two.)

Question31: An administrator is tasked with changing the password of the SDDC Manager super user account in a newly installed VCF environment.
Which method must the administrator use to complete this task?

Question32: An administrator is leveraging existing ESXi hosts to deploy a VMware Cloud Foundation (VCF) environment.
What are two of the minimum requirements for this deployment? (Choose two.)

Question33: An administrator wants to delete a VMware Cloud Foundation Workload Domain and re-use the attached ESXi hosts by returning them to the list of unassigned hosts in the SDDC Manager inventory.
Which action needs to be taken to complete this task?

Question34: An architect is presented with a Bill of Material for different vSAN ready nodes:
- 8 identical nodes with 1 vSAN disk group
- 8 identical nodes with 2 vSAN disk groups
What is the ideal design of VMware Cloud Foundation domains that the architect should recommend?

Question35: Which type of IP subnets are required when enabling Workload Management in VMware Cloud Foundation?

Question36: An architect is decommissioning a host from a VI Workload Domain and wants to reuse it in a VMware Cloud Foundation environment.
Which statement accurately describes this process?

Question37: An architect needs to create a VMware Cloud Foundation (VCF) VI Workload Domain design with the following requirements:
- Design blueprint needs to be repeatable for additional regions
- Multiple availability zones
- Seven nodes per availability zone to host the workloads
- vSAN storage will be used
What is the maximum accepted latency supported by vMotion between the two availability zones?

Question38: What is a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment?

Question39: Which two roles are provided by a local NSX Manager appliance? (Choose two.)

Question40: An administrator needs additional capacity on a vSAN cluster. Each host currently has only one disk group.
Which two approaches can be used to expand storage capacity in this situation? (Choose two.)

Question41: What is the correct sequence of steps to add a new VI Workload Domain in a VMware Cloud Foundation environment?

Question42: A systems administrator has finished imaging hosts on the first cluster using an ESXi ISO.
Afterwards, the administrator configured the network and the VM network port group on the hosts.
Which service does the administrator need to configure to complete the initial configuration of all ESXi hosts?

Question43: Which two NSX-T Data Center components are present in VMware Cloud Foundation when Application Virtual Networks (AVNs) are deployed? (Choose two.)

Question44: A systems administrator has recently added newly-commissioned hosts in the VI workload domain, and IP addresses are automatically configured to their associated network pool. The administrator reviews which storage options require only vMotion and NFS networks in the network pool.
Which two storage options have this requirement? (Choose two.)

Question45: The architect of a multi-site VMware Cloud Foundation solution is tasked with ensuring that the prerequisites for vSAN data at rest encryption have been achieved. The existing design calls for use of the vSphere Native Key Provider. NSX-T is configured with Federation, and both sites benefit from a stretched T0 and T1 network topology.
A new security policy requires the use of vSphere Virtual Machine encryption, in addition to the at-rest encryption already configured. During a failover test from Site-A to Site-B using Site Recovery Manager, the virtual machines were unable to power-on.
How does the design need to be changed to support the new requirement?

Question46: During a VCF design workshop, the architect gathered the following customer requirements:
- There should be two environments: PROD and DEV.
- PROD and DEV workloads should communicate without traversing the
physical network.
- The PROD workload domain should be separate from the DEV workload
domain.
- The VCF infrastructure design should be flexible and scalable as much as possible.
How many total NSX manager cluster(s) will be deployed as part of the solution?

Question47: A VMware architect has been asked to design a VMware Cloud Foundation solution for an online gaming company.
The Chief Information Officer (CIO) of the company has asked the architect to focus on these requirements:
- The environment should be optimized for maximum hardware utilization.
- The environment should be highly available.
Which method meets these requirements and is supported for vCenter Server with VMware Cloud Foundation?

Question48: An administrator is planning to enable vSphere with Tanzu on an existing VI workload domain.
The following information is known:
- There is one vSphere cluster in that domain where all ESXi hosts have two uplinks.
- The NSX edge cluster will be deployed on the same vSphere cluster.
- Both System and NSX traffic will use the same uplinks of the VDS
switch spanning the ESXi hosts.
Which statement accurately describes the deployment of this NSX edge cluster?

Question49: What are the minimum hardware requirements to run customer workloads within a cluster in a VI workload domain considering maintenance operations without risking availability?

Question50: Which component is upgraded when using the SDDC Manager management domain upgrade workflow in VMware Cloud Foundation?

Question51: Which sizing tool is available for calculating management domain storage requirements?

Question52: An architect is designing overlay networking for multiple VMware Cloud Foundation VI workload domains. Each workload domain is composed of two clusters which reside within a single rack, and each rack hosts only a single workload domain. Workload domains are assigned to individual tenants.
The following requirements must be met in the design.
- Tenants require the capability to manage their own NSX-T networking.
- Each VI workload domain compute cluster must have its own Tier-0
gateway for traffic separation.
- No additional hardware costs can be incurred.
Which design meets these customer requirements?

Question53: An architect is designing a new vSAN cluster to be added to an existing workload domain for a customer who is on a tight budget.
What is the minimum number of hosts required for this additional cluster?

Question54: What is a valid way to replace the expiring evaluation Tanzu license for a vSphere with Tanzu cluster?

Question55: A customer purchased six new HPE ProLiant DL380 Gen10 hosts and is interested in deploying a VCF infrastructure that will co-exist with the current VMware on AWS cloud DR solution in a hybrid model.
The architect suggests the VCF architecture that will help the customer run the workloads while offering workload isolation.
Which VCF architecture was suggested for this customer?

Question56: A VMware architect has been tasked to deploy a VCF environment for a large federal organization. Security, availability, and redundancy are key requirements for the deployment. The administrator has been asked to keep the cost down as well.
A standard deployment of VCF is being planned for the headquarters. The first VI domain is estimated to have 5,000 VMs.
Which vCenter Server appliance sizing should the architect use for the VI workload domain?

Question57: Which functionality is provided by NSX Global Manager?

Question58: What do VM Storage Policies match to when using vSphere with Tanzu?

Question59: A VMware Cloud Foundation consultant has a requirement to enable task-based backups for the SDDC Manager. What are two steps that need to be pre-configured to achieve this goal?
(Choose two.)

Question60: An administrator is tasked with deploying a new VI Workload Domain with VMFS on FC storage.
Which type of network pool must the hosts be associated with while adding them to VCF inventory?

Question61: What is required as part of enabling the Harbor Image Registry?

Question62: Which two configuration steps are required for achieve north/south connectivity while configuring an NSX Edge node in VMware Cloud Foundation from the SDDC Manager UI? (Choose two.)

Question63: Where is the Harbor Image Registry service enabled?